What To Do If Your Water Heater Unexpectedly Stops Working
What To Do If Your Water Heater Unexpectedly Stops Working
Blog Article
Were you on the lookout for info around What Would Cause My Electric Water Heater to Stop Working??
Several contemporary homes take advantage of an electrical water heater for their heating unit, due to its ease as well as ease of use. Nevertheless, just like any other electric appliances, troubles may emerge with its use, unexpectedly. It can be actually frustrating to wake up to a chilly shower as opposed to a hot one or having your bath with water that isn't warm enough or even as well warm. Whatever the case may be, hot water heater troubles can be quite stressful. Luckily, we have actually made a list of possible options to your hot water heater issues. There are a number of elements that might create many of these issues, maybe a concern with the power supply, the electric heating element, or the thermostat. Before doing anything, ensure you shut off the main power supply for security. Whatever the issue is, getting it taken care of need to not pose too much of an issue if you follow these actions:
Call A Specialist:
If after changing all defective components and resetting your temperature level, the water heater still isn't working, you might need to call a specialist plumber for an expert point of view. The issue with your heater could be that the cold and hot taps have actually been switched or it might be undersized for the amount of warm water needed in your home. Whatever the case may be, a professional plumber would certainly aid fix the issue.
Inspect Your Power Supply:
As basic as this may appear, it is really necessary. Without sufficient power, your water heater will not work. So the first thing to do when your water instantly retires is to validate that it isn't a power trouble. Check if the fuse is blown out or the circuit breaker tripped. If the circuit breaker is the issue, simply turn it off and on once again. Replace any type of damaged or worn-out fuse. Evaluate the home appliance with power after these modifications to see if it's currently functioning.
Inspect Your Thermostat:
If your water heater still isn't working or the water coming out isn't hot enough, you may need to check the temperature settings on your top thermostat. Make certain the circuit breaker is switched off before doing anything. Open the accessibility panel and also press the red switch for temperature level reset over the thermostat. This must assist heat up the water. Turn the circuit breaker back on and check if the trouble has actually been settled.
Examine the Burner in the Water Heater:
If it's not a power problem, then attempt looking into your burner if it is still functioning. Evaluate each of your heating elements to be sure the trouble isn't with any one of them. If any of them is damaged, replace that part and after that check whether the warm water is back on.
Conclusion
Hot water heater issues are not constantly major. Most of them are because of minor concerns like a blown fuse or damaged heating element. Replacing the damaged parts must suffice. Nevertheless, if you are still incapable to solve the issue, give a call to your local plumber to come to get it taken care of.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I was brought to that report about No Hot Water — Water Heater Repair from a good friend on our other blog. Sharing is nice. Helping others is fun. Kudos for your time. Visit us again soon.
Request An Appointment
Report this page